V3 Configuration Reset
To reset the Prospero v3:
- Turn the unit off.
- Turn all of the DIP switches off (down) except for Switch 7 on the “mode” bank (the 7-position DIP switch module). Set Switch 7 to on (up).
- Turn all of the switches on the front panel off except for Switch 24. Turn Switch 24 on.
- This may require repatching a switch into the 24th position.
- Turn the unit on, wait 30 seconds, and then turn it back off.
- Turn DIP Switch 7 and cue Switch 24 off.
- Turn the unit back on.
Configuration will be cleared out and the unit will be in its default state.
Having problems? Check out the 
Prospero Troubleshooting page for answers.
Prospero Troubleshooting page for answers.