logo

Connect and Sign Into Web Interface

To use Prospero’s web configuration interface, the unit must be connected to your network or computer via the ethernet port on the back of the device. See here for instructions on connecting data via ethernet.

Sign In

Sign into the web interface by opening a browser and typing 10.1.0.20 into the URL bar. You may need to adjust your computer’s network settings to put it on the same subnet as this.
Additionally, the Prospero’s IP address can be changed. If you have changed it, please substitute that IP address for the default address here. If configuration has been reset, it will default back to 10.1.0.20.